Addressing Most Common Plumbing Complications alongside Quick Fixes.

Pinterest LinkedIn Tumblr
Ever since the origin of human civilization, providing clean water has been a challenge. But with the emergence of innovatory technologies, water supply in households has been available in plenty. In today’s jet-age universe, people are not worried about getting clean water. They have water purifiers at home alongside automatic tanks too. Although there’s no scarcity of water, there’s definitely a couple of things that need to get addressed no sooner than later.
Plumbing issues, being one of them, come in different forms. While the inexpensive and simplest ones are dripping faucets and running toilets, the complex scenarios result from pipe leaks, faulty water heater, and more. To help you get a better idea of affordable plumbing fixes here’s presenting the most common plumbing problems.
Leaking pipes and faucets are another most common plumbing problem occurring in houses and apartments. Did you know that fixing a dripped faucet will save 10% of the total water bill? A dripping faucet occurs when the washer gets damaged. The damage can include stiffening, dislodging, or tearing. When the damage occurs, its washer cannot seal tightly. Thus, it allows small water amounts to drip.
plumber in Brisbane
plumber in Brisbane
Quick Fix: Replacing the faucet’s washer solves the condition. You can perform a DIY job; but, it is better to replace the washer with specialty equipment. This is where the professional help of a plumber can troubleshoot the problem. Leaking pipes either are a simple job or a complicated one. Even when you need replacing a U-joint, it is simple to let an assistant handle this job.

Major Water Heater Issues and Causes:

Water heater complications cannot be ignorable as they are easy to spot. Leaks can be a significant cause of water heating issues. As a result, you get doused with cold water. The fact is that mineral deposits can also reduce water heater efficiency, thereby reducing the hot water supply in the house. Another cause of such issues is sediments that result in strange sounds from the heater. These caused by exploding or heating of deposits or even the build-up of scales on the elements.
plumber in Brisbane
plumber in Brisbane
Quick Fix: It’s imperative to check the pilot light in case the water heater is running on gas. If you see the pilot light switched off, the unit does not produce warm water. Look at the temperature setting and ensure that it did not get turned down. If mineral deposits are causing the problem, drain the water tank and flush out sediments. If water gets pooled on floors, it’s the right time to consult plumbers in Brisbane.

A Constant Running Toilet:

Toilet plumbing issues happen in various forms. But, running toilets are the most annoying ones. Although the toilet works, it runs and wastes water always, thereby causing that annoying sound. It happens when the inner works aren’t working properly. Its flapper valve is letting the water run constantly. Another potential cause is an imbalanced float, besides a leak or loose-fill tube.
Quick Fix: Check every component and ensure everything place accurately. A flexible tube should be inside the tank. Adjust the float and check for the chain to attach it to the flapper. If you think simple adjustments would not work, call a professional.

Clogged Toilet and Drains:

When waters back up once you empty the sink or shower, that’s when you can spot clogged drains. For a clogged washroom, the signs are immediate. Clogged or slow drains occur when it gets blocked. Items like hair, small toy, shampoo lid, and other items can clog the drain. As these solid items fail to move through the pipe, it creates an obstacle for water to run out.
plumber in Brisbane
plumber in Brisbane
Quick Fix: A plunger can be an ideal fix for a clogged drain or toilet. To remove the clog, a plunger would work greatly. It’s the simplest and affordable plumbing tool that loosens clogs by using air pressure. You need to place its open end over the drain. In a moving position, pull it out and again push it inside the drain. As it creates suction, you can draw the blockage using a plier to remove clumps.


Note that each plumbing problem calls for a unique quick fix. If you fail at these DIY methods, do not hesitate to call a Platts Plumbing at your rescue.

Write A Comment

Pin It